PERFECT DRAFT BEER TAP

You tap the perfect beer yourself!

There is currently no keg of beer in your tap. This is intentional, to avoid waste. Do you fancy a freshly tapped beer? Let us know and we will be happy to tell you more about the current stock. We always have several (special) beers ready to go in 5-liter kegs!

Manual

1. Rinse your glass without drying it extensively. A wet glass keeps your beer nice and cold and allows you to check the head.

2. Hold the glass under the tap at a 45-degree angle and fully open the tap in one go.

3. Slowly bring the glass out of the 45-degree angle, to a vertical position. The faster you do this, the thicker the head.

4. Close the tap in one smooth motion. You can remove excess foam with the skimmer (or just drink it quickly, we don't judge. ;-))

TIME FOR A NEW KEG? 

• Turn the appliance off.  
• Slide the black button on the front on the beer tap to the right and open both doors.  
• Lift up the blue locking arms and lift the beer keg out of the beer tap.  
• Remove the protective cap and tubing.  
• Press the two blue buttons and remove the tap unit.  
• Rinse the tap unit.  
• Time for a new beer keg!  
• Attach the tap unit to the new beer keg.  
• Attach the hose into the tap unit and snap into place. Sometimes it helps to twist the hose a little.  
• Place the new beer keg in the beer tap.  
• Move the blue locking levers downward 
• Close the doors and move the release knob  
• Turn the beer tap back on. The beer keg is now cooled.  
• If the green light is on, the beer is at the right temperature  
• Tap, but. Cheers!

There is currently no keg of beer in your tap. This is deliberate, to prevent waste. Would you like a freshly tapped beer? Let us know and we will be happy to tell you more about the current stock. We always have several (special) beers ready in 6 liter kegs!

TIME FOR A NEW KEG?

Turn off the device.
Slide the black button at the front of the beer tap to the right and open both doors.
Lift the blue locking arms and lift the beer keg from the beer tap.
Remove the protective cap and the hose.
Press the two blue buttons and remove the tap unit.
Rinse the tap unit.
Time for a new beer keg!
Attach the tap unit to the new beer keg
Attach the hose to the tap unit and click into place. Sometimes it helps to turn the hose a little.
Place the new beer keg in the beer tap.
Move the blue locking levers down
Close the doors and slide the unlock button
Turn the beer tap back on. The beer keg is now cooled.
If the green light is on, the beer is at the right temperature
Tap, but. Cheers!

3 BEER PLEASE

1. Rinse your glass without drying it extensively. A wet glass ensures that your beer stays nice and cold and that you can properly control the foam head.

2. Hold the glass under the tap at a 45 degree angle and open the tap completely in one go.

3. Slowly raise the glass from the 45 degree angle to a vertical position. The faster you do this, the thicker the foam head.

4. Close the tap in one smooth movement. You can remove excess foam with the skimmer (or just drink it quickly, we don't judge. ;-))